39 m³/min 25 bar high-pressure Portable Air Compressor for Deep Drilling & Mining
25 bar · 39 m³/min · 522 kW · Cummins
VIEW MOREPeakroc®
Air Compressor


17 m³/min
8 bar
142 kW
Cummins
Peakroc® PRMD series portable air compressors with a free air delivery range of 5.00–46.38 m³/min and a working pressure of 7–35 bar, these compressors can meet the requirements of almost any industrial application.
Certifications:
ISO9001 Quality Management System
UKAS Quality Management
CE Certification (European Safety Compliance)
PeakRoc® PRMD-1708 portable air compressors are widely used in:
Water well & geothermal drilling
Mining and quarry operations (DTH/top-hammer support)
Abrasive blasting and steel surface preparation
Pipeline pressure testing, purging, and cleaning
Hydropower, road & bridge, and general construction air supply
Peakroc® portable diesel screw air compressor provides 17 m³/min free air delivery at 8 bar (600 cfm / 116 psi), covering medium-to-high flow applications where stable airflow and mobility are required. The towable chassis, sound-insulated canopy, and service-friendly layout make it a dependable air source for remote and harsh environments.
Heavy-duty diesel power for continuous duty in hot, dusty, or off-road conditions.
Reinforced, vibration-damped chassis with large service doors and weather-resistant enclosure.
Sound-attenuated canopy for lower operating noise on site.
Industrial screw air end with optimized rotor profile for high volumetric efficiency.
Low oil carryover and stable 8-bar delivery suitable for multiple pneumatic tools.
Oversized cooling package for sustained output under heavy load.
Two-stage air filtration captures up to 99.9% dust for drilling and quarry environments.
High-efficiency oil separation and long-life filters reduce maintenance costs.
Clear instrumentation for pressure/temperature monitoring and fault alerts.
| Model: PRMD-1708 | |
|---|---|
| Free air delivery | 17.00 m³/min (600 cfm) |
| Working pressure | 8 bar (116 psi) |
| Max. design pressure | 8 bar (116 psi) |
| Dimensions (L × W × H) | 3500 × 2050 × 2300 mm |
| Weight | 2400 kg |
| Wheel quantity | 2 |
| Outlet valve size | G 1-1/2″ × 1 + G 3/4″ × 1 |
| Diesel Engine | |
| Engine brand | Cummins |
| Engine model | QSB5.9-C190-31 |
| Rated power | 142 kW (190 hp) |
| Bore × stroke × cylinders | 102 × 120 mm × 6 |
| Engine speed (rated) | 2200 RPM |
| Engine speed (unloaded) | 1400 RPM |
| Engine oil capacity | 18 L |
| Coolant capacity | 45 L |
| Battery capacity | 2 × 760 CCA |
| Fuel tank capacity | 240 L |
| Compressor System | |
| Compressed air vessel capacity | 112 L |
| Lubricant capacity | 50 L |
Medium-depth drilling, multi-tool sandblasting, and construction air supply where high flow at moderate pressure is required.
Yes—typical setups include one large DTH hammer or several sandblasting/air tools in parallel, depending on hose sizing and pressure drop.
Designed for 24/7 duty with adequate cooling, filtration, and fuel capacity for long shifts.
For blasting or instrument air, an aftercooler/dryer is recommended; for drilling, it’s optional based on site requirements.
Common practice: engine oil ~250 h, air & fuel filters ~500 h, separator element ~1,000 h (adjust for dusty sites).
Yes—options typically include cold-start aids, low-temperature packages, and high-altitude calibration.
Models similar in brand/specs
25 bar · 39 m³/min · 522 kW · Cummins
VIEW MORE
8 bar · 9 m³/min · 74 kW · Cummins
VIEW MORE
10 bar · 8.5 m³/min · 74 kW · Cummins
VIEW MORE